Inspections & tests
We maintain templates for a variety of equipment inspection and test processes, often referred to as Inspection and Test Reports (ITRs).
These are intended to be used by contractors as a base-line guide for:
- Demonstrating the minimum evidence of compliance with our required design standards, construction quality and operational safety requirements, and
- Provision of asset characteristics and performance details on new equipment, for the purposes of registration of the new asset data in our asset management, operations and financial systems.
The templates should be used as a guide to the minimum inspection, testing and asset information required to be delivered for asset handover.
If the contractor wishes to use their own ITRs and ITPs, they must at minimum include the criteria described in the templates for the relevant assets. In this case the ITRs / ITPs will need to be submitted to us for approval before use.
Note: The list of ITRs and ITPs does not cover all possible asset types. Where no ITR / ITP is listed but the contract requires one to be delivered the contractor will need to submit the proposed ITRs / ITPs for approval by us before use.
The templates should be used in conjunction with the Contract Specifications, our Design Standards, Strategic Product Specifications and the Water Services Association of Australia (WSAA) Codes.
Disclaimer
Please read the following disclaimer before referencing these documents.Any person or entity which relies upon the Template Inspection and Test Reports & Procedures from the Water Corporation website does so entirely at their own risk and without any right of recourse to the Water Corporation, including, but not limited to, using the Template Inspection and Test Reports & Procedures for works other than for or on behalf of the Water Corporation. The Template Inspection and Test Reports & Procedures available from the Water Corporation website are intended solely for information only and cannot be relied upon. The Water Corporation accepts no liability for any loss or damage that arises from anything in the Template Inspection and Test Reports & Procedures including (but not limited to) any loss or damage that may arise due to the errors and omissions of any person.
The Water Corporation shall not be responsible, nor liable, to any person or entity for any loss or damage suffered as a consequence of reliance on, or the unlawful use of, or reference to, the Template Inspection and Test Reports & Procedures, including but not limited to the use of any part of the Template Inspection and Test Reports & Procedures without first obtaining prior express written permission from the CEO of the Water Corporation.
Any interpretation of anything in the Template Inspection and Test Reports & Procedures that deviates from specific Water Corporation Project requirements must be referred to the Water Corporation’s project manager and/or commissioning specialist / manager for that particular Project for further direction or agreement.
Inspection, test reports and procedures
You can find the template you are after by using the categories below. Alternatively you can download a zip file containing all the templates below
Downloads |
---|
Electrical - Actuator - Construction Verification - Inspection and Test Report |
Electrical - Actuator - Pre-Commissioning |
Electrical - Actuator - Supply Verification - Inspection and Test Report |
Downloads |
---|
Electrical - Earth - Construction Verification - Inspection and Test Report |
Electrical - Transformer Earthing - Construction Verification - Inspection and Test Report |
Electrical - Transformer Voltage Mitigation - Construction Verification - Inspection and Test Report |
Downloads |
---|
Electrical - Motor - Construction Verification - Inspection and Test Report |
Electrical - Motor - Pre-Commissioning - Inspection and Test Report |
Electrical - Motor - Supply Verification - Inspection and Test Report |
Downloads |
---|
Mechanical - Sound Attenuator - Construction Verification - Inspection and Test Report |
Mechanical - Sound Attenuator - Pre-Commissioning - Inspection and Test Report |
Mechanical - Sound Attenuator - Supply Verification - Inspection and Test Report |
Downloads |
---|
Electrical - Transformer - Construction Verification - Inspection and Test Report |
Electrical - Transformer - Pre-Commissioning - Inspection and Test Report |
Electrical - Transformer - Supply Verification - Inspection and Test Report |